Careers

NoeCha is a young and ambitious organization. In order to reach our objectives we are building a team of people who can provide high quality technical and organizational expertise and have the drive and enthusiasm to succeed in a challenging environment. We require commitment, professionalism, enthusiasm and flexibility.

In return for your hard work, we aim to provide you with a working environment where your contribution is recognised, development is encouraged, where you enjoy your job and have some fun along the way.

Positions available

To apply for positions or request more information send your CV to info@noecha.com.

  • Service technician

    Install, repair and maintain NoeCha’s printers in the field.

     

    JOB DESCRIPTION

     

    As NoeCha’s service technician, you will be in charge of the following activities:

     

    • On site installation, training and start-up of the production with the customer.

    • Remote and on-site troubleshooting, repair and maintenance.

    • Produce detailed technical reports and keep history the ERP system.

    • Installing and maintaining demo printers.

    • Installation and service support during exhibitions

    • Support to production or R&D department when in the office.

     

     

    REQUIREMENTS

     

    To perform at best all these tasks, you should have:

     

    • A technical degree or certificate in mechanics/electronics/electric engineering.

    • A good ability to work with flexible work schedule, to adapt to last minute changes & travels.

    • Min. 2 years’ experience in maintenance of industrial machines, preferably in the printing industry.

    • Good English skills are required (CEFR min. level B1).

  • Mechanical/Electrical assembler

    Part of the production department, the mechanical/electrical assembler is in charge of building NoeCha’s various printing machines.

     

    JOB DESCRIPTION

     

    In particular, you will perform the following tasks:

     

    • Assemble, install, align, adjust and fit sub-assemblies and parts or auxiliary equipment using appropriate tools and equipment.

    • Work with close tolerances and fits to meet engineering and operating requirements.

    • Clean parts and maintain tooling and equipment per proper work instructions.

    • Perform test stand preset calibration and final test of product.

    • Collaborate with engineering by serving as a technical resource to improve processes and solve problems.

     

     

    REQUIREMENTS

     

    To perform at best all these tasks, you should have:

     

    • A technical degree or certificate in mechanics/electronics/electric.

    • Knowledge of and ability to use a variety of basic hand tools (e.g., wrenches, hammers, screwdrivers, scrappers, box cutters) and to work on machine tools.

    • Ability to read and understand electrical diagrams and mechanical drawings.

    • Excellent ability to work in a team and a great working autonomy

    • Min. 2 years experience in assembly of industrial machines.

  • Mechanical engineer

    Join the R&D Department and take care of the 3D designing and technical drawings for any new or modified mechanical components of NoeCha’s products.

     

    JOB DESCRIPTION

     

    In particular, you will perform the following tasks:

     

    • Managing projects using engineering principles and techniques.

    • Designing and implementing equipment modifications to help improve performance, safety, reliability and cost reduction.

    • Interact with production department to design and implement new production processes.

    • Using research, analytical, conceptual and planning skills, particularly mathematical modelling and computer-aided design making sure a product can be made reliably and will perform consistently in specified operating environments.

    • Producing product/component technical specifications, drawings and bill of material.

    • Recommending modifications following prototype test results.

     

     

    REQUIREMENTS

     

    To perform at best all these tasks, you should have:

     

    • Have a technical certificate or degree in engineering.

    • Be able to work in a team as well as to plan and manage the assigned work in autonomy.

    • Have a knowledge of production and machining process of metal and plastic components.

    • Be creative and problem-solving.

    • Have the following IT skills: Knowledge of CAD software as well as 2D and 3D drawing software, preferably INVENTOR.

    • Have min. 2 years of experience in a similar position.

    • Have an advanced knowledge of English (CEFR min. level B2).

  • Purchasing administrator

    Be the responsible of the purchasing department and support the company administration.

     

    JOB DESCRIPTION

     

    In particular, you will perform the following tasks:

     

    • Processing the supply requests, selecting materials and suppliers on the basis of the price / quality ratio of the products.

    • Entering the orders in the ERP software and monitoring the progress of orders up to delivery.

    • Managing incoming orders.

    • Planning and managing requests for technical assistance and supporting the administration.

    • Managing offers and estimates to customers.

    • Help with the management of phone calls and the reception of customers and suppliers.

     

     

    REQUIREMENTS

     

    The ideal candidate is in possession of the following requirements:

     

    • A diploma (of high school or university degree) in economics, commerce and / or management.

    • Possesses also a short experience in the position or similar roles.

    • Team spirit skills, great operational proactivity, and problem solving.

    • Demonstrate great precision and organization in work.

    • Familiarity in the use of the office package and preparation for the use of management software.

    • English language minimum level QCER B2.

  • Software engineer

    Be a NoeCha's software engineer.

     

    JOB DESCRIPTION

     

    As a NoeCha’s software engineer you will take care of:

     

    • The development of software driving the various NoeCha’s printers, initially with supervision and then in full autonomy.

     

    • Follow installations and training of the machines in house and at client’s site.

     

     

    REQUIREMENTS

     

    The ideal candidate should meet the following requirements:

     

    • Bachelor's degree or Master's degree in computer science.

    • Knowledge of programming languages C / C ++ in Microsoft Visual Studio .

    • TCP / IP Socket knowledge and Win 32 libraries.

    • Willingness to travel in Italy and abroad.

    • English language minimum level QCER B2.

     

    Optional:

     

    • A previous PLC and / or Assembly programming experience would be appreciated.

    • Qt knowledge would also be appreciated.

    • Software version control (Git).

     

Operational headquarters

Via dell'Artigianato 50, 24042

Capriate San Gervasio (BG), Italy.

+39 02 95761958

Registered office

Via Bartolomeo Eustachi 2, 20129 Milano (MI), Italy.

info@noecha.com

© 2019 NoeCha srl - VAT 07241370969 - Privacy policy

 
  • Service technician

     

    To install, repair and maintain NoeCha’s printers in the field.

     

    As NoeCha’s service technician, you will be in charge of the following activities:

     

    • On site installation, training and start-up of the production with the customer.

    • Remote and on-site troubleshooting, repair and maintenance.

    • Produce detailed technical reports and keep history the ERP system.

    • Installing and maintaining demo printers.

    • Installation and service support during exhibitions

    • Support to production or R&D department when in the office

     

    To perform at best all these tasks, you should have:

     

    • A technical degree or certificate in mechanics/electronics/electric engineering.

    • A good ability to work with flexible work schedule, to adapt to last minute changes & travels.

    • Min. 2 years’ experience in maintenance of industrial machines, preferably in the printing industry.

    • Good English skills are required (CEFR min. level B1)

     

  • Mechanical/Electrical assembler

     

    Part of the production department, the mechanical/electrical assembler is in charge of building NoeCha’s various printing machines.

     

    In particular, you will perform the following tasks:

     

    • Assemble, install, align, adjust and fit sub-assemblies and parts or auxiliary equipment using appropriate tools and equipment.

    • Work with close tolerances and fits to meet engineering and operating requirements.

    • Clean parts and maintain tooling and equipment per proper work instructions.

    • Perform test stand preset calibration and final test of product.

    • Collaborate with engineering by serving as a technical resource to improve processes and solve problems.

     

    To perform at best all these tasks, you should have:

     

    • A technical degree or certificate in mechanics/electronics/electric

    • Knowledge of and ability to use a variety of basic hand tools (e.g., wrenches, hammers, screwdrivers, scrappers, box cutters) and to work on machine tools.

    • Ability to read and understand electrical diagrams and mechanical drawings.

    • Excellent ability to work in a team and a great working autonomy

    • Min. 2 years experience in assembly of industrial machines

     

  • Mechanical engineer

     

    As a NoeCha mechanical engineer you will join the R&D Department and will take care of designing in 3D, making all technical drawings for any new or modified mechanical components of NoeCha’s products.

     

    Your main task will be:

     

    • Managing projects using engineering principles and techniques.

    • Designing and implementing equipment modifications to help improve performance, safety, reliability and cost reduction.

    • Interact with production department to design and implement new production processes.

    • Using research, analytical, conceptual and planning skills, particularly mathematical modelling and computer-aided design making sure a product can be made reliably and will perform consistently in specified operating environments.

    • Producing product/component technical specifications, drawings and bill of material.

    • Recommending modifications following prototype test results.

     

    In order to perform at best all the above task, you should:

     

    • Have a technical certificate or degree in engineering.

    • Be able to work in a team as well as to plan and manage the assigned work in autonomy.

    • Have a knowledge of production and machining process of metal and plastic components.

    • Be creative and problem-solving.

    • Have the following IT skills: Knowledge of CAD software as well as 2D and 3D drawing software, preferably INVENTOR.

    • Have min. 2 years of experience in a similar position.

    • Have an advanced knowledge of English (CEFR min. level B2).

     

  • Purchasing administrator

     

    Be the responsible of the purchasing department and support the company administration.

     

    In particular, you will perform the following tasks:

     

    • Processing the supply requests, selecting materials and suppliers on the basis of the price / quality ratio of the products.

    • Entering the orders in the ERP software and monitoring the progress of orders up to delivery.

    • Managing incoming orders.

    • Planning and managing requests for technical assistance and supporting the administration.

    • Managing offers and estimates to customers.

    • Help with the management of phone calls and the reception of customers and suppliers.

     

    The ideal candidate is in possession of the following requirements:

     

    • A diploma (of high school or university degree) in economics, commerce and / or management.

    • Possesses also a short experience in the position or similar roles.

    • Team spirit skills, great operational proactivity, and problem solving.

    • Demonstrate great precision and organization in work.

    • Familiarity in the use of the office package and preparation for the use of management software.

    • English language minimum level QCER B2.

     

  • Software engineer

     

    Be a NoeCha's software engineer.

     

    As a NoeCha’s software engineer you will take care of:

     

    • The development of software driving the various NoeCha’s printers, initially with supervision and then in full autonomy.

     

    • Follow installations and training of the machines in house and at client’s site.

     

    The ideal candidate should meet the following requirements:

     

    • Bachelor's degree or Master's degree in computer science.

    • Knowledge of programming languages C / C ++ in Microsoft Visual Studio .

    • TCP / IP Socket knowledge and Win 32 libraries.

    • Willingness to travel in Italy and abroad.

    • English language minimum level QCER B2.

     

    Optional:

     

    • A previous PLC and / or Assembly programming experience would be appreciated.

    • Qt knowledge would also be appreciated.

    • Software version control (Git).

 

Operational headquarters

Via dell'Artigianato 50, 24042

Capriate San Gervasio (BG), Italy.

+39 02 95761958

Registered office

Via Bartolomeo Eustachi 2, 20129 Milano (MI), Italy.

info@noecha.com

Customer area

Newsletter

© 2019 NoeCha srl - VAT 07241370969 - Privacy policy